Termékek egyéb gyógyszerek (31)

The strapping tool ST IMPA 13/16 is usable with both polypropylene strap and polyester strap (green, high resistance) from 12 to 16 mm. Given the high tightness of the seal it is recommended to use a polyester strap. The breaking load depends on the strap of choice. MODEL:ST IMPA 13 Usable strap:Polypropylene and polyester smooth or embossed Closure:special seal knurled P403 Strap width :mm. 12 - 13 Strap thickness:mm. 0.40 - 0.90 Weight without support: Kg. 2,7

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 25-32 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:25-32 mm Strap thickness:0,8-1,27 mm Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:5,7 Kg

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

BENCHTOP EUROHOLE CUTTING MACHINE WITH LEVER FPE1-EURO P The FPE1 EURO-P allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather etc. It is suitable for small productions. The punch is easily replaceable and is equipped with an extractor device in rubber to facilitate the extraction of the waste. The punch is an element subject to wear. Robust steel structure. Simple use. Dimensions:350x60x250 mm Net weight:6,6 Kg

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm Strap thickness:0,60-1,27 mm Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,2 Kg

This kit is the easiest and most economical kit for strapping and is used especially when you do not need a battery tensioning device or larger coils. This kit is suitable for strapping of pallets up to 800 kg, considering putting two straps for each pallet. The holding capacity of strap dipends on material type and on strap choice. Max width usable strap:mm. 16 Strapping tool weight:Kg. 2,9

New battery strapping tool ST DIGIT MT with manual lever for tensioning and battery for vibratory welding. Versatile and easy to use thanks to the digital keypad for welding control. Suitable for medium/heavy industrial applications, it is used with polypropylene (PP) and polyester (PET) straps from mm. 13 to mm 19 wide. The batteries 14.4 Vdc 3.0 A / h Li-ion battery ensures a high autonomy Strap width:13-19 mm polypropylene - 13-16 mm polyester Strap thickness:0,5- 1,00 mm Max. strap tension:2000 N Tensioning speed:14 mt/min Battery :14.4 V dc 3 A/h Li-ion Cycles for single charge:300 cycles Weight:3.9 Kg

Semi-automatic sealless steel strapping tool, with pneumatic tensioning and manual sealing of the strap. It requires a flat support surface with a minimum length of 200 mm. For use with glossy or blue strap from mm. 13 to mm. 19 with a maximum thickness of 0.60 mm. The holding capacity of strap dipends on material type to strap and on strap choice. Model:ST IMA DP Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,4 - 0,6 Joint type:Sealless Weight:Kg 5,3

Strapping tools for metal strapping 10-13-16/18-19-20 mm manual for flat surface, joint with copper-plated steel seal. Simple and cheap, is used for strapping packages and pallets of any size. This strapping tool requires a flat surface with a minimum length of 200 mm. In general it is not recommended in case of high productions. The sealing depends on the type of material and strap. Strap quality :Steel strap standard / blued R. Max 850 N/mm2 Strap width:mm. 10-13 -16 Tickness strap:mm. 0,5 – 0,6 Joint type:Metallic seal

Pneumatic strapping tool with vibration welding XQD 19 for polyester strap PET, compact, handy and easy to use. The high traction force (2770 N max) and the short supporting base enable its use in every industrial sector for the closure of flat and round packages (with a minimum diameter of mm. 500). The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap quality: PET Joint type:Friction weld seal Joint efficiency:75-85% Package type:flat / round Strap width:13- 19 mm Strap thickness:0,6- 1,2 mm Max. tension:2700 N / 270 Kg Tension speed:10 m ./min. Air pressure :6/7 bar / 85 - 100 PSI Weight: 3.8 Kg .

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head

New model P328/P328S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 600 strapping with a charge), the maximum tensile strength (up to 2400 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality. Strap width:from 12.0 to 16.0 mm. Strap thickness:0,4- 1,05 mm Max. strap tension:N 250-2600 Tensioning speed:67-124 mm / s Battery :18 V - 4 Ah. Li-Ion Cycles for single charge:300 cycles Weight:4.2 Kg

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 0.9. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm. Strap thickness:0,40-0,90 mm. Air pressure:6 bar Air consumpt:14 Lt. / sec Weight:4,9 Kg

Manual strapping tool for flat surfaces (sealless), easy and reliable to use in heavy industrial duty applications. Version equipped by steel made tension lever and rear feedwheel protection. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thickness up to 0.70 mm. The tightness of the seal depends on the material type and the strapping choice. Model:ST IMA G (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 7,0 Joint type:Sealless Weight:Kg 4,5

New battery strapping tool GT ONE ECO with adjustable operating mode according to the application: manual or soft for delicate products. The insertion of the strap is simple and fast and you simply have to press a button to get the tension and the vibration welding (heating by friction). The strapping tool is perfectly balanced, it can be used for vertical and horizontal strappings. It is equipped with a latest generation brushless motor driven by a lithium battery and with a digital display that shows all useful parameters (tension, welding time and battery charge level). Strap width:9-16 mm Strap thickness:0,4-0,85 mm Max. strap tension:1800 N Tensioning speed:14 mt/min Battery :14.4 V dc 3 A/h Li-ion Cycles for single charge:300 cycles Weight:3.7 Kg

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear. Size:400x260x1100h mm Net weight:26,5 kg Package dimensions:420x280x1140h mm Power supply:230V/ 50Hz Power:370 W Fuses:2 x 3.15 A, 100mA Noisiness:less than 70 dB (A)

The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:140 Kg

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device. MODEL:CTT 20 Max strap width:20 mm Tensioning max.: 50-450 daN Tensioner weight:1,2 kg

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

Model P329S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 450 strapping with a charge), the maximum tensile strength (up to 4000 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality. Strap width:16,0 – 19,0 mm Strap thickness:0.40-1.35 mm. Max. strap tension:500-4000 N Tensioning speed:49-79 mm/s Battery :18 V. – 4 Ah. Li-Ion Cycles for single charge:300 cycles Weight:4.2 Kg

Manual strapping tool for flat surfaces (sealless). Manual steel strapping tool easy and reliable to use in medium/heavy industrial duty applications. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thinkness up to 0.6 mm. The tightness of the seal depends on the material type and strapping choice. Model:ST IMA (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Sealless Weight:Kg 3,9

Manual steel strapping tool, lightweight and sturdy, with sealless joint. Suitable for medium/heavy duty packages with flat surface for supporting the tool. It can be also used on packages with irregular shape, however a flat surface with a minimum length 150 mm is needed. Works with glossy or blue strap mm. 13-16-19 with thickness max. 0.6 mm. The holding capacity of strap dipends on material type to strap and on strap choice Model:TP-SL 200 (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Sealless Weight:Kg 3,45

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic

Gas hand tool for thermo shrinking Hornet, high power (until 90 Kw), but very light and handy with practical handle with fast lever gas and electronic ignition. The high power and ease of use allow a fast shrinking of plastic films of each thickness and the realization of packaging even large. Raptor it's available with power of 70 Kw and 90 Kw. The main areas of application are: Packing : Welding / retraction of packaging also large Boating : Realisation of coverages in plastic film for boat storage Building : Welding and retraction of plastic film for protective scaffolding Environment : Welding of plastic film for coating for containment tanks Example model:FP HORNET 70 Power :70 Kw. - 238.800 btu/h Supply :propane gas Max. pressure :4 bar Consumption :5,22 Kg/h Ignition :piezoelectric

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

Pneumatic welder ST POLI WELDING with vibration welding (heating by friction) for PET polyester strap. Compact, handy, easy to use, is suitable for closing every kind of flat packaging. Moreover, thanks to the short base, you can strap round packages with a minimum diameter of mm. 500. The operator simply inserts the two overlapping strips into the strapping tool and press a button to perform the vibration welding. The welder is used in conjunction with a manual tensioner or for the packaging of parcels already pressed. Strap width:10,0 – 19,0 mm. Strap thickness:0.40-1.27 mm. Air pressure:6 bar Air consumpt:14 Lt. / sec Weight:2,3 Kg

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically. Maximum pierceable paper weight:800 g/m² Punch size:30x60 mm Dimensions:550x410x1150 mm

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 16,0 to 19,0 mm. Strap thickness:0,80-1,27 mm. Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,3 Kg

The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional). MODEL:PL 13 Usable strap:polypropylene Closure type:metal seal PL13 Max width usable strap:mm. 12 Max thickness usable strap:max mm. 0,8 Strapping tool weight:Kg. 2,9

New strapping tool with battery GT ONE with adjustable operating modes according to the application: automatic, semi-automatic, manual and "soft" for delicate products. The insertion of the strap is quick and easy and, in automatic mode, the operator simply have to press a button to get the tension and vibration welding (heating by friction). Perfectly balanced, it can be used for vertical and horizontal strapping. It is equipped with brushless motor powered by lithium-ion battery of latest-generation and digital display with parameters always visible (tensioning, welding time, battery level). MODEL: GT ONE 10-16 Usable strap:Polypropylene (PP) and polyester (PET) smooth or embossed Type of closure:Vibration sealing (heating by friction) Sealing resistance:75-85% (depends on the quality of the strap) Strap width:10-16 mm Strap thickness: 0,5-1,10 mm Max. tension:2750 N Tensioning speed :13 mt/min